Space and time resolved discharge evolution of a large volume X-ray triggered XeCl laser system

The spatial distribution and the temporal development of the net gain have been measured in a ten liter active volume switchless discharge XeCl laser. The experimental results are compared with both zero-dimensional and two-dimensional kinetic code predictions. The comparison between the results of the kinetic codes and of some measurements relevant to the time-dependent discharge homogeneity allows a deeper insight into the influence of the streamer evolution on the discharge characteristics.ENEA StudentENEA Guest     

Lattice energies of apatites and the estimation of DeltaH f degrees (PO 4 3-, g)

Experimentally based lattice energies are calculated for the apatite family of double salts M(5)(PO(4))(3)X, where M is a divalent metal cation (Ca, Sr, Ba) and X is hydroxide or a halide. These values are also shown to be estimable, generally to within 4%, using the recently derived Glasser-Jenkins equation, U(POT) = AI(2I/V(m))(1/3), where A = 121.39 kJ mol(-)(1). The apatites exhibiting greater covalent character (e.g., M = Pb, Cd, etc.) are less well reproduced but are within 8% of the experimentally based value. The lattice energy for ionic apatites (having identical lattice ionic strengths, I) takes the particularly simple form U(POT)/kJ mol(-)(1) = 26680/(V(m)/nm(3))(1/3), reproducing cycle values of U(POT) well when V(m) is estimated by ion volume summation and employing a volume for the PO(4)(3)(-) ion (not previously quantified with an associated error) of 0.063 +/- 0.003 nm(3). A value for the enthalpy of formation of the gaseous phosphate ion, DeltaH(f)( ) degrees (PO(4)(3)(-), g), is absent from current thermochemical tabulations. Examination of solution and solid state thermochemical cycles for apatites, however, leads us to a remarkably consistent value of 321.8 +/- 1.2 kJ mol(-)(1). Experimental and estimated lattice energies were used along with other thermodynamic data to determine enthalpies, entropies, and free energies of dissolution for apatites of uncertain stabilities. These dissolution values are compared with the corresponding values for stable apatites and are used to rationalize the relative instability of certain derivatives.     

An experimental and theoretical study of the gas-phase decomposition of monoprotonated peptide nucleic acids

Peptide nucleic acids (PNAs) are DNA/RNA mimics which have recently generated considerable interest due to their potential use as antisense and antigene therapeutics and as diagnostic and molecular biology tools. These synthetic biomolecules were designed with improved properties over corresponding oligonucleotides such as greater binding affinity to complementary nucleic acids, enhanced cellular uptake, and greater stability in biological systems. Because of the stability and unique structure of PNAs, traditional sequence confirmation methods are not effective. Alternatively, electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry shows great potential as a tool for the characterization and structural elucidation of these oligonucleotide analogs. Extensive gas-phase fragmentation studies of a mixed nucleobase 4-mer (AACT) and a mixed nucleobase 4-mer with an acetylated N-terminus (N-acetylated AACT) have been performed. Gas-phase collision-induced dissociation of PNAs resulted in water loss, cleavage of the methylene carbonyl linker containing a nucleobase, cleavage of the peptide bond, and the loss of nucleobases. These studies show that the fragmentation behavior of PNAs resembles that of both peptides and oligonucleotides. Molecular mechanics (MM+), semiempirical (AM1), and ab initio (STO-3G) calculations were used to investigate the site of protonation and determine potential low energy conformations. Computational methods were also employed to study prospective intramolecular interactions and provide insight into potential fragmentation mechanisms.     

An Inorganic-Organic Hybrid Composite Featuring Metal-Chalcogenide Clusters

The cluster complex, Re₆( ₃-Se)₈(PEt₃)₅(4-vinylpyridine)(SbF₆)₂ (1), featuring the face-capped octahedral Re₆( ₃-Se)₈²⁺ cluster core and site-differentiating triethylphosphine and 4-vinylpyridine ligands has been synthesized and structurally characterized. The complex crystallized in monoclinic space group P2₁ with a=11.748(1)Å, b=15.1212(2)Å, c=19.941(2)Å, =90°, =94.411(3)°, =90°, V=3531.8(7)ų, Z=2, R1=0.0531, wR2=0.0774. Copolymerization of styrene with 1 via the polymerizable 4-vinylpyridine ligand afforded a novel inorganic-organic hybrid composite of high molecular weight and a low polydispersity index. Structural integrity of the cluster building block is maintained upon hybrid formation.     

Simple one-pot multicomponent approach to polyfunctionalized 2-amino-1-methyl-6-(methylthio)-5-nitro-4-aryl-1,4-dihydropyridine-3-carbonitriles

A series of polyfunctionalized 2-amino-1-methyl-6-(methylthio)-5-nitro-4-aryl-1,4-dihydropyridine-3-carbonitriles have been prepared using a multicomponent condensation reaction between aromatic aldehydes, malononitrile, and (Z) N-methyl-1-(methylthio)-2-nitroethenamine in the presence of Et₃N in acetonitrile.     

Water‐Soluble Triazabutadienes that Release Diazonium Species upon Protonation under Physiologically Relevant Conditions

Triazabutadienes are an understudied structural motif that have remarkable reactivity once rendered water‐soluble. It is shown that these molecules readily release diazonium species in a pH‐dependent manner in a series of buffer solutions with pH ranges similar to those found in cells. Upon further development, we expect that this process will be well suited to cargo‐release strategies and organelle‐specific bioconjugation reactions. These compounds offer one of the mildest ways of generating diazonium species in aqueous solutions.     

Copper coordination polymers from cavitand ligands: hierarchical spaces from cage and capsule motifs,and other topologies

The cyclotriveratrylene-type ligands (±)-tris(iso-nicotinoyl)cyclotriguaiacylene L1 (±)-tris(4-pyridylmethyl)cyclotriguaiacylene L2 and (±)-tris{4-(4-pyridyl)benzyl}cyclotriguaiacylene L3 all feature 4-pyridyl donor groups and all form coordination polymers with Cu^I and/or Cu^II cations that show a remarkable range of framework topologies and structures. Complex [Cu^I ₄Cu^II _1.5(L1)₃(CN)₆]·CN·n(DMF) 1 features a novel 3,4-connected framework of cyano-linked hexagonal metallo-cages. In complexes [Cu₃(L2)₄(H₂O)₃]·6(OTf)·n(DMSO) 2 and [Cu₂(L3)₂Br₂(H₂O)(DMSO)]·2Br·n(DMSO) 3 capsule-like metallo-cryptophane motifs are formed which linked through their metal vertices into a hexagonal 2D network of (4³.12³)(4².12²) topology or a coordination chain. Complex [Cu₂(L1)₂(OTf)₂(NMP)₂(H₂O)₂]·2(OTf)·2NMP 4 has an interpenetrating 2D 3,4-connected framework of (4.6².8)(6².8)(4.6².8²) topology with tubular channels. Complex [Cu(L1)(NCMe)]·BF₄·2(CH₃CN)·H₂O 5 features a 2D network of 6³ topology while the Cu^II analogue [Cu₂(L1)₂(NMP)(H₂O)]·4BF₄·12NMP·1.5H₂O 6 has an interpenetrating (10,3)-b type structure and complex [Cu₂(L2)₂Br₃(DMSO)]·Br·n(DMSO) 7 has a 2D network of 4.8² topology. Strategies for formation of coordination polymers with hierarchical spaces emerge in this work and complex 2 is shown to absorb fullerene-C₆₀ through soaking the crystals in a toluene solution.     

二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫 Ⅱ.原位氢和分子氢的比较

研究了水/甲苯乳化液中二苯并噻吩(硫芴)在分散型钼酸、磷钼酸和四硫钼酸铵催化剂存在下的加氢脱硫反应.反应在高压釜中于340℃及三种不同的气氛即H2,H2/H2O和CO/H2O(CO和H2O经水煤气转换反应(WGSR)产生原位氢)的存在下进行.用GC和GC-MS鉴定、分析了气体和液体产物的组成.结果表明:对硫芴的加氢脱硫反应,在分散型钼酸和磷钼酸存在下,原位产生的氢比加入的分子氢更为有效.动力学研究结果表明:WGSR反应比硫芴的加氢脱硫反应快5～10倍,说明在原位氢存在下硫芴的加氢脱硫反应是速度控制步骤.总之,试验结果证实,在分散型催化剂和原位氢存在下的加氢过程是重油乳状液改质和破乳的有效方法.     

Fully Collapsed Imploded Cryptophanes in Solution and in the Solid State

Cryptophanes with flexible linkers derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene with either bisoxydi(ethylamine) or bis(aminopropyl)ether were isolated as single crystals, the crystal structures of which showed the proposed, but previously uncharacterised, out-in conformation, in which both cyclotriguaiacylene fragments adopt a crown conformation with one crown sitting inside the other. The usual cage-like out-out conformation of the cryptophanes was observed when crystals were dissolved upon heating, and the molecules collapsed back to the out-in isomers over time. In contrast, a cryptophane also derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene but with rigid dibenzalhydrazine linkers was isolated as the more usual out-out isomer.     

Tris-N-alkylpyridinium-functionalised cyclotriguaiacylene hosts as axles in branched [4]pseudorotaxane formation

A series of [4]pseudorotaxanes composed of three-way axle threads based on the cyclotriguaiacylene family of crown-shaped cavitands and three threaded macrocyclic components has been achieved. These exploit the strong affinity for electron-poor alkyl-pyridinium units to reside within the electron-rich cavity of macrocycles, in this case dimethoxypillar[5]arene (DMP). The branched [4]pseudorotaxane assemblies {(DMP)₃?L}³⁺,where L = N-alkylated derivatives of the host molecule (±)-tris-(isonicotinoyl)cyclotriguaiacylene, were characterised by NMR spectroscopy and mass spectrometry, and an energy-minimised structure of {(DMP)₃?(tris-(N-propyl-isonicotinoyl)cyclotriguaiacylene)}³⁺ was calculated. Crystal structures of N-ethyl-isonicotinoyl)cyclotriguaiacylene hexafluorophosphate and N-propyl-isonicotinoyl)cyclotriguaiacylene hexafluorophosphate each show ‘hand-shake’ self-inclusion motifs occurring between the individual cavitands.